Nylon is the most commonly used 3D printing material, It is a Degradable material, Nylon comes in the category of Thermoplastics, polymer flexible when thin, but with very high inter-layer adhesion. its chemical formula is (C12H22N2O2)n, The monomer (nylon) is typically is a type of plastic derived from crude oil.

Nylon physical properties

printing temperature 210 – 260 °C
Density1.125 g·cm−3
Heat Distortion50 °C
Tensile strength 57Mpa
Elongation at break196%
Flexural Strength57Mpa
Flexural Modulus1495MPA
Izod Impact15 KJ·m−3
Melting Temperature200°C
Crystallization temperature90°C
This is printed using PLA material