PLA+ properties

PLA+ is the most commonly used 3D printing material, It is a Degradable material, PLA+ comes in the category of Thermoplastics polymer. its chemical formula is (C3H4O2)n + 3% impurites, The monomer is typically made from fermented plant starch such as corn, cassava, sugarcane, or sugar pulp.

PLA+ physical properties

printing temperature 205 – 225 °C
Density1.250 g·cm−3
Heat Distortion52 °C
Tensile strength 65Mpa
Elongation at break12%
Flexural Strength75Mpa
Flexural Modulus2102MPA
Izod Impact8.5 KJ·m−3
Melting Temperature195°C
Crystallization temperature116°C